Permit - Motorola WS5100 Series Cli Reference Manual

15-6 WS5100 Series Switch CLI Reference Guide
Example
The example below marks the type of service (TOS) value to 254 for all traffic coming from
the source network:
WS5100(config)#access-list 3 mark tos 254 xxx.xxx.3.0/24
WS5100 (config)#access-list 3 permit any
15.1.7 no
Standard ACL Config Commands
Negates a command or set its defaults
Syntax
no(deny|mark|permit)
Negates all the syntax combinatins used in deny,
Parameters
deny
mark

permit

Example
WS5100(config-std-nacl)#no permit any rule-precedence 10
WS5100(config-std-nacl)#
WS5100(config-std-nacl)#no deny any rule-precedence 20
WS5100(config-std-nacl)#
WS5100(config-std-nacl)#no mark tos 4 192.168.2.0/24 rule-
precedence 30
WS5100(config-std-nacl)#
15.1.8 permit
Standard ACL Config Commands
permit(A.B.C.D/M|any|host)
permit any(log|rule-precedence|wlan)
permit any log(rule-precedence)<1-500>
permit any rule-precedence<1-500>
permit any wlan<1-32>(log|rule-precedence)(rule-precedence)<1-500>
Specifies packets to reject
Specifies packets to mark
Specifies packets to forward
mark and permit designations.