Set - Motorola WS5100 Series Cli Reference Manual

upgrade.history
Please export these files or delete them for more space.
WS5100(config-crypto-map)#

10.1.8 set

Crypto Map Config Commands
Use this command to set the various set parameters of the peer device.
Syntax
set (localid|mode|peer|pfs|remote-type[ipsec-l2tp|xauth]|
security-association|session-key|transformset)
set localid(dn|hostname)
set security-association
(level(perhost)|lifetime(kilobytes|seconds)<value>)
set session-key (inbound|outbound)(ah|esp)
set session-key (inbound|outbound) ah <hexkey data>
set session-key (inbound|outbound) esp <SPI> cipher <hexdata key>
authenticator <hexkey data>
Parameters
local id
mode
peer
782
Sets the local identity
• dn – Defines the distinguished name
• hostname – Sets the hostname
Sets the mode of the tunnels for this Crypto Map
• aggressive – Initiates aggressive mode
• main – Initiates main mode
Sets the IP address of the peer device. This can be set for
multiple remote peers. The remote peer can be either an IP
address or hostname
Note: In manual mode, only one remote peer can be added
for a crypto map
• IP address – Enter the IP address of the peer device. If
not configured, it implies responder only to any peer
crypto-map
Aug 29 18:32
10-7