Motorola WS5100 Series Cli Reference Manual page 449

default-11b
default-11bg
adoption-pref-id <0-
65535>
antenna-mode
<diversity|primary|secon
dary>
base-bridge
(enable|max-clients <1-
12>
beacon-interval<50-200> Sets the beacon interval (in K-uSec)
bridge-fwd-delay <4-30> Sets the STP bridge forward delay (in seconds)
bridge-hello <1-10>
bridge-max-ageout
<4-3600>
bridge-msg-age <6-40>
bridge-priority
<0-65535>
Adopts the default 11b configuration template
Adopts the default 11bg configuration template
Employs a preference identifier for this radio port. The radio
port is more likely to be adopted by a wireless switch that
is a preferred switch
Defines the antenna diversity mode. Select from the
following options:
• diversity–Full diversity (both antennas)
• primary–Primary antenna only
• secondary–Secondary antenna only
Note: Before executing this command, ensure the radio is
present and is a AP300
Sets base bridge values
• enable – Allows the given radio to act as a base bridge
and accept connections from client bridges
• max-clients <1-12> – Configures a base-bridge. Enter
maximum client bridges allowed
• <4-30> - Time in seconds
Sets the STP bridge hello (in seconds)
• <1-10> - Time in seconds
Sets the STP bridge maximum ageout (in seconds)
• <4-3600> - Time in seconds
Sets the STP bridge message age (in seconds)
• <6-40> - Time in seconds
Sets the STP bridge priority (in seconds)
• <0-65535> - Priority value
Wireless Instance 20-31