Motorola WS5100 Series Cli Reference Manual page 195

Usage Guidelines 1
1. Use the command along with ip to undo any IP based configuration.
no
[no] ip(access-list|default-gateway|dhcp|domain-lookup|
domain-name|http|local|name-server|nat|route|routing|ssh|telnet)
2. When using the
ip access-list
• ext-nacl – extended ACL. For more information, see
Extended ACL Instance on page 14-1
• std-nacl – Standard ACL. For more information, see
Standard ACL Instance on page 15-1
• dhcp – DHCP Server instance. For more information, see
DHCP Server Instance on page 17-1
• dhcpclass – DHCP User Class instance. For more information, see
DHCP Class Instance on page 18-1
• Clear the ip dhcp binding using the
NOTE: To delete Standard/Extended and MAC ACL use
list <access-list name>
Usage Guidelines 2
Follow the steps below to create a DHCP User Class:
1. Create a DHCP class named
DHCP classes
WS5100(config)#ip dhcp class WS5100DHCPclass
WS5100(config-dhcpclass)#
2. Create a USER class named
. WS5100 supports a maximum of 8 Users classes per DHCP class
dhcpclass)
WS5100(config)#ip dhcp class WS5100DHCPclass
WS5100(config-dhcpclass)#
3. Create a Pool named
WS5100(config)#ip dhcp pool WID
WS5100(config-dhcp)#
parameter, enter the following contexts:
clear
under the Global Config mode.
WS5100DHCPclass
. The privilege mode changes to
MC800
, using
WID (config)#
Global Configuration Commands
command
. WS5100 supports a maximum of 32
mode
5-31
no access-
(config-