Management - Motorola WS5100 Series Cli Reference Manual

12.1.10 management

Interface Config Commands
Sets the selected interface as management interface. It can only be used on a VLANx
interface. The TFTP/FTP server providing the switch its config file at startup must be
accessible via this interface.
VLAN 1 is the default management interface for the switch
Syntax
management
Parameters
None
Usage Guidelines
The management privilege can be set only on a L3 interface. Use this command along with
the
(config) management secure
is restricted to the management VLAN only
Refer management on page 5-37
Example
WS5100(config)#interface vlan 1000
WS5100(config-if)#management
WS5100(config-if)#
12.1.11 no
Interface Config Commands
Negates a command or sets its defaults
Syntax
no [crypto|description|duplex|ip|mac|port-channel|
shutdown|spanning-tree|speed|static-channel-group|switchport]
Parameters
The command negates any command associated with it. Wherever required, use the
no
same parameters associated with the command getting negated
Example
WS5100(config-if)#no duplex
WS5100(config-if)#
in the config mode. This ensure management access
for
(config) management secure
interface Instance 12-9
configuration.