Motorola WS5100 Series Cli Reference Manual page 322

14-12 WS5100 Series Switch CLI Reference Guide
14.1.7 no
Extended ACL Config Commands
Negates a command or sets its defaults
Syntax
no(deny|mark|permit)
Negates all the syntax combinations used in the deny,
configure the Extended ACL
Parameters
deny
mark
permit
Usage Guidelines
Removes an access list control entry. Provide the rule-precedence value when using the
no command
Example
WS5100(config-ext-nacl)#no mark 8021p 5 tcp 192.168.2.0/24 any
rule-precedence 10
WS5100(config-ext-nacl)#
WS5100(config-ext-nacl)#no permit ip any any rule-precedence 10
WS5100(config-ext-nacl)#
WS5100(config-ext-nacl)#no deny icmp any any rule-precedence 10
WS5100(config-ext-nacl)#
Specifies packets to reject
Specifies packets to mark
Specifies packets to forward
mark and permit designations to