Dot11-Shared-Key-Auth; End - Motorola WS5100 Series Cli Reference Manual

20-18 WS5100 Series Switch CLI Reference Guide

20.1.15 dot11-shared-key-auth

Wireless Configuration Commands
Enables support for 802.11 shared key authentication
Syntax
dot11-shared-key-auth
Parameters
enable
Example
WS5100(config-wireless)#dot11-shared-key-auth enable
WS5100(config-wireless)#

20.1.16 end

Wireless Configuration Commands
Ends and exits the current mode and changes to the PRIV EXEC mode. The prompt changes
to
WS5100#
Syntax
end
Parameters
None
Example
WS5100(config-wireless)#end
WS5100#
NOTE: Shared key authentication has known weaknesses that can
compromise your WEP key. It should only be configured to
accommodate wireless stations unable to carry out Open-System
authentication
Enables support for shared key authentication