Motorola WS5100 Series Cli Reference Manual page 253

8.1.7 set
Crypto Peer Config Commands
Configures the aggressive-mode of
Syntax
set aggressive-mode (password)
Parameters
aggressive-mode
Example
WS5100(config-crypto-peer)#set aggressive-mode password CheckMeIn
WS5100(config-crypto-peer)#
8.1.8 show
Crypto Peer Config Commands
Displays the current system information running on the switch
Syntax
show <paramater>
Parameters
?
Example
WS5100(config-crypto-peer)#show ?
access-list
aclstats
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
crypto-peer
Defines aggressive mode attributes
• password – Specifies a tunnel-password attribute
Displays the parameters for which the information can be
viewed using the show command
Internet Protocol (IP)
Show ACL Statistics information
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
encryption module
Debugging information outputs
crypto-peer 8-5