Service - Motorola WS5100 Series Cli Reference Manual

14-18 WS5100 Series Switch CLI Reference Guide

14.1.9 service

Extended ACL Config Commands
Invokes service commands to troubleshoot or debug the
configurations
Syntax
service(clear|diag-shell|save-cli|show|start-shell|tethereal)
Parameters
clear
diag-shell
save-cli
show
start-shell
tethereal
Example
WS5100(config-ext-nacl)#service diag-shell
Diagnostic shell started for testing
diag >
boot
delete
exit
fallback
help
logout
no
reload
service
show
upgrade
Removes the specified support information
Provides diagnostic shell access to debug and test the
switch
Saves CLI tree for all modes (in HTMLformat)
Displays the running system information
Provides shell access
Dumps and analyzes network traffic
Reboots the switch
Deletes specified file from the system.
Exit from the CLI
Configures firmware fallback feature
Description of the interactive help system
Exit from the CLI
Negate a command or set its defaults
Halt and perform a warm reboot
Service Commands
Show running system information
Upgrade firmware image
instance
(config-if)