End; Exit; Hardware-Address - Motorola WS5100 Series Cli Reference Manual

17.1.11 end

DHCP Config Commands
Exits the current mode and moves to the PRIV EXEC mode. The prompt changes to
Syntax
end
Parameters
None
Example
WS5100(config-dhcp)#end
WS5100#

17.1.12 exit

DHCP Config Commands
Ends the current mode and moves to the previous mode (GLOBAL-CONFIG). The prompt
changes to
Syntax
exit
Parameters
None
Example
WS5100(config)#ip dhcp pool TestPool
WS5100(config-dhcp)#exit
WS5100(config)#

17.1.13 hardware-address

DHCP Config Commands
Reserves an IP address (manually) based on a DHCP client's hardware address. Use the
hardware-address
Syntax
hardware-address [XX-XX-XX-XX-XX-XX | XX:XX:XX:XX:XX:XX]
WS5100#(config)#
command to remove this from the DHCP pool
DHCP Server Instance 17-11
WS5100#
no