Motorola WS5100 Series Cli Reference Manual page 207

auto-revert-period
<1-1800>
dhcp-server (enable)
discovery-period <10-60> Sets the redundancy discovery interval in seconds. The
enable
group-id <1-65535>
handle-stp (enable)
heartbeat-period <1-
255>
hold-period <10-255>
interface-ip <Switch IP>
manual-revert
member-ip <Member IP>
mode [primary|standby]
Example
WS5100(config)#redundancy discovery-period 20
WS5100(config)#
WS5100(config)#redundancy handle-stp enable
WS5100(config)#
WS5100(config)#redundancy heartbeat-period 20
WS5100(config)#
WS5100(config)#redundancy hold-period 25
WS5100(config)#
WS5100(config)#redundancy mode primary
WS5100(config)#
Sets the redundancy auto-revert delay interval in minutes.
The default is 5 minutes
Enables the DHCP Redundancy protocol
default is 30 seconds
Enables the redundancy protocol
Sets the cluster ID. The default cluster ID is 1
Delays the redundancy protocol state machine exec,
considering STP
Sets the redundancy heartbeat interval
Sets the redundancy hold interval
Sets the redundancy interface IP address
Reverts standby to non-active mode
Adds a member to this redundancy group
Sets the mode to either primary or standby
Global Configuration Commands 5-43