Terminal - Motorola WS5100 Series Cli Reference Manual

15.1.11 terminal

Standard ACL Config Commands
Sets the number of lines displayed on the terminal window
Syntax
terminal(monitor|no)
terminal no(monitor)
Parameters
monitor
no
monitor
Usage Guidelines
By default, log messages are generally not displayed over a Telnet session. Use the
terminal monitor
Example
WS5100(config-std-nacl)#terminal monitor
WS5100(config-std-nacl)#
WS5100(config-std-nacl)#terminal no monitor
WS5100(config-std-nacl)#
Copies debug output to the current terminal line
Negates a command or set its defaults
Copies debug output to the current terminal line
command to view the log messages over a Telnet session
Standard ACL Instance 15-11