Show - Motorola WS5100 Series Cli Reference Manual

help)]
packet only)]
file)]

11.1.13 show

Trustpoint (PKI) Config Commands
Displays current system information running on the switch
Syntax
show <parameter>
Parameters
?
Example
WS5100(config-trustpoint)#show ?
access-list
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
environment
file
ftp
history
interfaces
ip
ldap
licenses
logging
mac
[-p (no promiscuous mode for interface)]
[-n (disable name resolution)] [-c <count> ] [-h (detailed
[-E (to capture ESPD) ][-e (capture nonEspd packets)]
[-f <capture filter expression in format "xx xx xx"> ]
[-i <interface on which to capture packets> ] [-W (wisp
[-s <snaplen> ] [-r <filename> (read contents of specified
[-w <savefile> (save capture in specified file) ]
[-X (for examples on tethereal capture filter) ]
Displays the parameters for which the information can be
viewed using the show command
Internet Protocol (IP)
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
crypto
Display debugging setting
show environmental information
Display filesystem information
Display FTP Server configuration
Display the session command history
Interface status and configuration
Internet Protocol (IP)
ldap server
Show any installed licenses
Show logging configuration and buffer
Media Access Control
crypto-trustpoint Instance 11-9