Chapter 4. Privileged Exec Commands; Priv Exec Command - Motorola WS5100 Series Cli Reference Manual

Hide thumbs Also See for WS5100 Series:

Table of Contents

Most PRIV EXEC commands set operating parameters. Privileged-level access should be

password protected to prevent unauthorized use. The PRIV EXEC command set includes

commands contained within the USER EXEC mode. The PRIV EXEC mode also provides

access to configuration modes, and includes advanced testing commands.

The PRIV EXEC mode prompt consists of the host name of the device followed by a pound

sign (#). To access the PRIV EXEC mode, enter the following at the prompt:

WS5100#enable

The PRIV EXEC mode is often referred to as the enable mode, because the

command is used to enter the mode.

If a password has been configured, you are prompted to enter it before you can access the

PRIV EXEC mode. The password is not displayed and is case sensitive. If an enable

password has not been set, the PRIV EXEC mode can be accessed only from the router

console (terminal connected to the console port).

summarizes the switch PRIV EXEC commands:.

Table of Contents