19-24
WS5100 Series Switch CLI Reference Guide
19.1.15 service
Radius Configuration Commands
Invokes the service commands to trobuleshoot or debug the
configuration. This command is also used to enable the RADIUS server
Syntax
service(clear|diag-shell|radius|save-cli|show|start-
shell|tethereal)
service radius restart
Parameters
clear
diag-shell
radius
save-cli
show
start-shell
tethereal
Example
WS5100(config-radsrv)#service show cli
Radius Configuration mode:
+-authentication
+-data-source
+-ldap [authentication data-source (local|ldap)]
+-local [authentication data-source (local|ldap)]
+-eap-auth-type
+-all [authentication eap-auth-type (ttls-md5|ttls-pap|ttls-
mschapv2|peap-gt
c|peap-mschapv2|tls|all)]
+-peap-gtc [authentication eap-auth-type (ttls-md5|ttls-
pap|ttls-mschapv2|pe
ap-gtc|peap-mschapv2|tls|all)]
+-peap-mschapv2 [authentication eap-auth-type (ttls-md5|ttls-
pap|ttls-mschap
v2|peap-gtc|peap-mschapv2|tls|all)]
Removes the specified support information
Provides diag shell access
Enables a RADIUS server restart
Saves the CLI tree for all modes in HTML format
Displays running system information
Provides shell access
Dumps and analyzes network traffic
instance
(config-radsrv)