Ids - Motorola WS5100 Series Cli Reference Manual

20-20 WS5100 Series Switch CLI Reference Guide
Parameters
None
Example
WS5100(config-wireless)#help
CLI provides advanced help feature.
anytime at the command line please press '?'.
If nothing matches, the help list will be empty and you must backup
until entering a '?' shows the available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
command argument (e.g. 'show ?') and describes each possible
argument.
2. Partial help is provided when an abbreviated argument is entered
and you want to know what arguments match the input
(e.g. 'show ve?'.)
WS5100(config-wireless)#

20.1.20 ids

Wireless Configuration Commands
Defines the Wireless Intrusion Detection System (WIPS) configuration
Syntax
ids(anomaly-detection|detect-window|ex-ops)
ids anomaly-detection(all|average-noise-level|bad-essid-frame|
beacon-broadcast-essid|invalid-8021x-frame|invalid-frame-length|
invalid-frame-type|multicast-source|non-changing-wep-iv|
null-destination|same-source-destination|tkip-countermeasures|
unencrypted-traffic|weak-wep-iv)(enable|filter-ageout)
ids detect-window<5-300>
ids ex-ops(80211-replay-fails|all|association-requests|
authentication-fails|crypto-replay-fails|decryption-fails|
disassociations|eap-naks|eap-starts|probe-requests|unassoc-frames)
(filter-ageout<0-86400>|threshold(mu|radio|switch)<0-9999>)
When you need help,