Adding Text, Icons, And Bitmaps To A Button; Creating A Bargraph And Joystick; Adding A Bargraph Or Joystick Button; Setting Bargraph And Joystick Properties - AMX COLOR TOUCH PANELS WITH AUDIO (G3 FIRMWARE) Instruction Manual

Adding text, icons, and bitmaps to a button

1. Press
2. Press
3. Press any button to open the Text/Image page.
4. Go through each option and set as desired:
You cannot create or edit buttons with Unicode fonts on the panel. Any use of the
TEXT/IMAGE button to alter or create Unicode font supported buttons must be done
in the TPDesign3 Touch Panel Design Program.
5. Press

Creating a Bargraph and Joystick

Bargraphs are level monitors and adjustable level controls. These levels can be configured to
monitor and adjust audio outputs and lighting levels.
Joysticks are vertical and horizontal direction controllers you can use for things such as camera pan
and tilt control. Before starting, make sure to connect the touch panel to your Controller; otherwise,
the joystick will not work properly.

Adding a bargraph or joystick button

Create a new button using the Add operation bar in the
1. Press
2. Press
3. Press any button to open the Button Properties page.
4. Press
Properties page.

Setting Bargraph and Joystick Properties

Use the Button Properties page to set channel, level, and button colors. Refer to the Setting the
variable text code section on page 32 and the Setting the channel code section on page 31 for
further information. Refer to the Setting the button colors for channel-off conditions section on
page 32 for more information on colors for channel-off conditions.
4" Color Touch Panels with Audio
on the Edit bar to open the
BUTTON
to add text to the button. The
TEXT/IMAGE
and sets the text for the button's Off and On state.
TEXT OFF TEXT ON
and sets the icon for the button's Off and On state.
ICON OFF ICON ON
and
BITMAP OFF BITMAP ON
sets the On and Off properties the same.
MAKE ON SAME AS OFF
to close the Text/Image page and return to the Main page.
EXIT SAVE CHANGE
in the Edit bar to open the
BUTTON
in the Button menu to open the
PROPERTIES
to open the
BUTTON TYPE
menu.
BUTTON
TEXT/IMAGE
sets the bitmap for the button's Off and On state.
BUTTON
menu.
BUTTON
PROPERTIES
menus. Choose a button type to open its Button
BUTTON
Designing Touch Panel Pages
operation bar appears.
menu.
operation bar.
33