Creating A Bargraph; Adding A Bargraph To A Page - AMX Color Active-Matrix LCD Instruction Manual

Figure 75
Bargraph
Figure 76
PROPERTIES operation bar
52 Designing Touch Panel Pages

Creating a Bargraph

Bargraphs (Figure 75) are level monitors and adjustable level controls. These levels
can be configured to monitor audio outputs, lighting levels, and adjust audio or light
levels. Before you start, make sure to connect the touch panel to your Central Con-
troller. Otherwise, the bargraph may not work properly. Refer to the Touch Panel Pro-
gram Reference section for detailed information.

Adding a bargraph to a page

1.
Press EDIT to open the Edit bar.
2.
Create a new button using the ADD operation bar in the BUTTON menu.
3.
Press BUTTON in the Edit bar to open the BUTTON menu.
4.
Press PROPERTIES in the BUTTON menu to open the PROPERTIES operation
bar shown in Figure 76.
5.
Press the target button to open the Button Properties page.
6.
Press BUTTON TYPE to open the BUTTON TYPE menus shown in Figure 77.
Color Active-Matrix LCD Mini-Touch Panels