Counting Pieces; Databases; Database Of Operators - RADWAG WLT L Series User Manual

17. COUNTING PIECES

17.1. Databases

17.1.1. Database of operators

While in Counting pieces mode press F key on the balance keyboard or F2 on
the PC keyboard.
Choice of operator is done by arrows up and down, enter to edition by arrow to
the right fig.18.
Fig.18. Screen operators base – choice of operator for edition
After enter to edition of operator a following window will open:
Fig.19. Screen operators base – edition of operator parameters
name
index
Id
password
authorization Authorization level of operator(1 to 5). Level 5 highest authorization
Change of any parameter is performed by pressing arrow to the right and next
using keyboard introduce appropriate value. Confirm changes by ENTER or
cancel them by ESC. Exit from edition (ESC key). Enter to one level of menu
higher (again ESC key).
1 – number of operator
2 – name of operator
Name of operator (28 signs)
4 digits
6 signs
Password for logging (6 digits)
34