Average Tares - RADWAG 3Y Series User Manual

2. Result
3. Start date
4. End date
5. Product
6. User
7. Average
8. Average limit
9. Standard deviation
10. Quantity
11. No. of measurements
12. Method

29.9. Average tares

Before starting a <Non-destructive average tare> control it is possible to
determine the average tare value by weighing the packages. Each of above
processes is automatically saved in the <
control saved in the database on determining average tare value features its
specific number set at the moment of its completion.
Control number format:
X / y y / M M / d d / H H / m m, T where:
X - control type which takes the following values:
U – control regulated by the act,
Z – control completed by a user,
W - control regulated by an internal criteria
yy – year of control end,
MM – month of control end,
dd – day of control end,
HH – hour of control end,
mm – minute of control end,
T – control with determining the average tare value.
Balance user can preview data on each process of average tare determination.
Procedure
• Enter submenu <
manual,
• Enter <
(function not available in standard balance version)
Databases> in accordance with point 27 of this user
Average tare>database and select a desired record.
[status (result) of a control]
[date of control start]
[date of control end]
[name of a controlled product]
[name of a user carrying out the control]
[average value from carried out
measurements]
[average disqualifying value]
[average standard deviation]
[the value batch quantity (batch size) for
which the software accepts the size of
tested sample in accordance with the
regulation]
[no. of completed measurements]
[control method (internal criteria,
regulated by the act)]
Average tare>database. Each
- 168 -