SIP User's Manual
Notes:
To apply the loaded certificate for IPSec negotiations:
1.
Open the 'IKE Table' page (refer to "Configuring the IP Security Associations Table" on
page 95); the 'Loaded Certificates Files' group lists the newly uploaded certificates, as
shown below:
2.
Click the Apply button to load the certificates; future IKE negotiations are now
performed using the new certificates.
Version 6.0
•
The certificate replacement process can be repeated when necessary
(e.g., the new certificate expires).
•
It is possible to use the IP address of the device (e.g., 10.3.3.1) instead of
a qualified DNS name in the Subject Name. This is not recommended
since the IP address is subject to changes and may not uniquely identify
the device.
•
The server certificate can also be loaded via ini file using the parameter
HTTPSCertFileName.
Figure 3-61: IKE Table Listing Loaded Certificate Files
91
3. Web-Based Management
March 2010