8
FOR YOUR INFORMATION
2. Connect with the VE-PG3 using Telnet
M For Windows 7
q Start up Windows.
w Click the [Start] button, and then click [Run...].
Input "Telnet.exe" to the text box, and then click <OK>.
e The telnet screen appears, then input "open" and VE-PG3's IP address (example: 192.168.0.1).
r Input login ID and password, then push [Enter].
: "admin" (Fixed)
login ID
password : (Input the VE-PG3's administrator password)
t If the telnet can access to the VE-PG3, "VE-PG3 #" is displayed on the telnet screen.
M About the telnet commands
The following commands can be used for the Telnet function.
Command list ..................
Command help ...............
Automatic complement ...
Push the [Tab] key to display the telnet command list.
After typing a telnet command, push the [Tab] key to display the sub command
list.
After typing "help," enter a command to display the command description.
Example) "help save" ("save" command description is displayed.)
After typing first few characters of the command, push the [Tab] key. The rest
of the characters for the command are automatically entered.
Example) "n" + [Tab] -> network
Suggested commands are displayed.
Example) "res" + [Tab] -> reset restart
8-4