Table Of Contents - Arctic Cat 350 2011 Service Manual

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
3. Using a side-cutter (or suitable substitute), remove
the boot clamps; then remove the boots and
splined drive from the input shaft.
4. Remove the input shaft from the pinion housing.
5. Using the Multi-Seal Remover, remove the input
shaft seal. Account for a spacer.
6. Remove the snap ring securing the input shaft
bearing; then place the pinion housing in a press
and remove the bearing.
CD106
CD107
AF982
www.mymowerparts.com
Manual

Table of Contents

Assembling Input Shaft
1. Place the pinion housing in a press and install the
input shaft bearing. Secure the bearing with the
existing snap ring making sure the sharp edge of
the snap ring faces to the outside.
Section
Table of Contents
AF983
AF984
6
KX219
AF993
6-5