For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
9. Remove the cap screws holding the clutch cover
onto the right-side crankcase half. Note the posi-
tions of the different-lengthed cap screws for
installing purposes.
10. Using a rubber mallet, loosen the clutch cover;
then pull it away from the right-side crankcase
half. Account for two alignment pins and gasket.
D. Gear Position Switch
E. Centrifugal Clutch Assembly
F. Oil Pump Drive Gear
G. Oil Pump Driven Gear
H. Oil Pump
NOTE: Steps 1-10 in the preceding sub-section
must precede this procedure.
11. Remove the cap screw holding the gear position
switch onto the right-side crankcase half.
MD1092
MD1115
KC324A
www.mymowerparts.com
Manual
Table of Contents
12. Remove the gear position switch. Account for a
spacer.
13. Remove the one-way clutch noting the direction of
the green dot or the word OUTSIDE for installing
purposes.
14. Remove the left-hand threaded nut holding the
centrifugal clutch assembly.
CAUTION
Care must be taken when removing the nut; it has
"left-hand" threads.
Section
Table of Contents
KC326A
3
MD1286
MD1014
3-29