Arctic Cat 350 2011 Service Manual page 69

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
7. Place the carburetor into the intake pipe being
careful to align the lug on the carburetor with the
alignment tabs on the air intake pipe; then tighten
the clamp securely.
8. Install the air filter housing onto the frame; then
connect the inlet air duct, air silencer duct, and
intake housing to carburetor boot and tighten all
hose clamps securely.
3-44
KC238
KC170
KC245A
www.mymowerparts.com
Manual
Table of Contents
9. Install the shift rod onto the shift arm with bushing
and flat washer and secure with an E-clip; then
connect the speedometer sensor plug.
10. Connect the oil temperature connector and cooling
fan connector; then using new O-rings, install the
oil fittings onto the crankcase and secure with the
cap screws. Tighten to 8 ft-lb.
Section
Table of Contents
KC254
KC255
KC248