Arctic Cat 350 2011 Service Manual page 108

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
ASSEMBLING
1. With the high driven washer (1) on the counter-
shaft, install the high driven gear bushing (3),
bearings (2), and gear (4) on the countershaft; then
install the washers (5) and secure with the
snap-ring.
2. Install the high/low shift dog (6) on the counter-
shaft and secure with snap-ring (7); then install the
splined washer (8).
3. Install the low driven bushing (10), bearing (9),
and gear (11) on the countershaft; then install
splined washer (12).
FI671A
FI670
FI668A
www.mymowerparts.com
Manual
Table of Contents
4. Place the reverse driven bushing (13) onto the
shaft; then install the bearing (14), gear (15), and
splined washer (16). Secure with a snap-ring.
5. Install the reverse dog on the shaft; then place the
shift forks and shift shaft into position.
Section
Table of Contents
FI667A
3
FI666
FI665A
FI664
3-83