Arctic Cat 350 2011 Service Manual page 61

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
NOTE: Note the location of the bearing alignment
pin on the secondary output shaft.
2. Remove the reverse idler gear, spacer, and sleeve.
Account for the washer.
3. Remove the driveshaft.
4. Remove the shift fork shaft and the outer shift
fork.
3-36
MD1317
MD1325
MD1326
www.mymowerparts.com
Manual
Table of Contents
5. Remove snap ring and gear from the output side of
the gear cluster. Remove the gear cluster and the
inner shift fork together. Account for snap ring,
gear, and washer.
6. Noting the position of the slot on the end, remove
the shift cam assembly. Account for inner and
outer washers.
7. Remove the counterbalance gear. Account for the
key.
8. Remove the counterbalance shaft.
Section
Table of Contents
MD1327
MD1328
KC325