For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
11. If the brake pedal was removed during disassem-
bling, apply grease to the brake pedal pivot stud;
then install the brake pedal and secure with a flat
washer and cap screw. Tighten to 20 ft-lb.
KC249
KC250
KC251
www.mymowerparts.com
Manual
Table of Contents
12. Install the heat shield; then install the gas tank (see
Fuel/Lubrication/Cooling).
13. Install the front body panel, front rack, and foot-
wells (see Steering/Frame).
14. Pour the appropriate quantity and grade oil into the
crankcase; then connect the negative battery cable
and move the ATV outside to a well ventilated
area.
15. Start the engine and allow the engine to warm up
while checking for oil leaks; then shut the engine
off and check the oil level. Add oil as required.
Section
Table of Contents
KC232A
3
KC149A
3-45