Arctic Cat 350 2011 Service Manual page 50

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
5. Install the crankshaft protector.
6. Using Magneto Rotor Remover, break the
rotor/flywheel assembly loose from the crankshaft.
Remove the remover, the crankshaft protector, the
rotor/flywheel, and the starter clutch gear. Account
for the key.
CAUTION
Care must be taken that the remover is fully threaded
onto the rotor/flywheel or damage may occur.
MD1194
MD1365
MD1368
www.mymowerparts.com
Manual
Table of Contents
7. Remove the starter idler gear (No. 1) and starter
idler gear (No. 2).
8. Remove the gear shift shaft assembly and washer
from the left-side crankcase. Note the positions of
the alignment marks and washer for installing pur-
poses; then release the cam stopper spring tension.
Section
Table of Contents
MD1369
3
MD1370
MD1305
MD1239
3-25