Arctic Cat 350 2011 Service Manual page 19

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
3. Remove the headlight bulb assembly from the
headlight housing.
4. Install the new headlight bulb into the headlight
housing being careful not to get fingerprints or
other contaminates on the glass; then secure with
the spring.
5. Connect the wiring harness connector to the bulb;
then install the protective rubber boot making sure
it seals completely on the headlight harness.
TAILLIGHTS-BRAKELIGHTS
To replace a taillight-brakelight bulb, use the follow-
ing procedure.
1. Turn the bulb socket assembly counterclockwise
and remove from the housing.
KC163A
KC163B
KC146
www.mymowerparts.com
Manual
Table of Contents
2. Press in and turn the bulb counterclockwise to
remove. Press in and turn clockwise to install the
bulb.
3. Insert the bulb socket assembly into the housing
and turn it clockwise to secure.
RUNNING LIGHTS/BACK-UP
LIGHTS
The running lights are located outboard of the head-
lights, and the back-up lights are outboard of the tail-
lights/brakelights. To replace the bulbs, use the
following procedure.
1. Rotate the bulb socket counterclockwise to release
from light housing; then press in on the bulb and
turn counterclockwise to release from the socket.
2. Install a new bulb and press in rotating clockwise
to secure; then place the socket into the light hous-
ing and turn clockwise to secure.
Section
Table of Contents
KC157
2
KC158A
KC158B
2-11