Arctic Cat 350 2011 Service Manual page 55

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
15. Remove the cam chain.
16. Remove the oil pump drive gear cap screw.
17. Remove oil pump drive gear. Account for the pin.
18. Remove the snap ring holding the oil pump driven
gear.
3-30
MD1016
MD1335
MD1018
MD1017
www.mymowerparts.com
Manual
Table of Contents
NOTE: Always use a new snap ring when install-
ing the oil pump driven gear.
19. Remove oil pump driven gear. Account for the
drive pin and thrust washer.
 AT THIS POINT
To service clutch components,
Right-Side Components sub-section.
20. Remove three Phillips-head screws holding the oil
pump and remove the oil pump. Account for two
alignment pins.
 AT THIS POINT
To service center crankcase components only, pro-
ceed to Separating Crankcase Halves.
Section
Table of Contents
MD1019
MD1020
see Servicing
MD1060