Arctic Cat 350 2011 Service Manual page 163

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
2. Using a press, remove the bearing.
3. Using a press, install the new bearing into the
housing.
NOTE: Prior to installing the seal, apply High Per-
formance #2 Molybdenum Disulphide Grease to
the seal outside diameter.
4. Using an appropriate seal installation tool, evenly
press the seal into the cover bore until seated.
CAUTION
Make sure the tool is free of nicks or sharp edges or
the seal will be damaged.
GC066
CC900
CC901
www.mymowerparts.com
Manual
Table of Contents
5. Repeat steps 1-4 for the opposite side.
INSTALLING DIFFERENTIAL
1. Align the input flange with the front output flange;
then place the differential into position on the
frame and install the cap screws and nuts. Tighten
to 38 ft-lb.
2. Install the cap screws securing the flange couplers
together and tighten to 20 ft-lb.
3. Install the front axles (see Drive Axles in this sec-
tion).
Section
Table of Contents
GC060
6
KC291A
AG925
6-13