Arctic Cat 350 2011 Service Manual page 186

For Discount Arctic Cat Parts Call 606-678-9623 or 606-561-4983
CLEANING AND INSPECTING
NOTE: Whenever a part is worn excessively,
cracked, or damaged in any way, replacement is
necessary.
1. Clean all rear body panel components with warm
soap and water.
2. Inspect side panels and rear body panel for cracks
and loose rivets.
3. Inspect threaded areas of all mounting bosses for
stripping.
4. Inspect for missing decals.
INSTALLING
1. Place the rear body panel/fender in place on the
ATV; then secure with the cap screws on the side
frame and the rear rack assembly. Tighten all fas-
teners securely.
8-10
KC281
KC279
www.mymowerparts.com
Manual
Table of Contents
2. Connect the light connectors and secure to the
frame; then install the battery, starter relay, and
auxiliary brake. Connect all wiring making sure to
connect the positive cables first.
3. Secure the rear fenders to the footwells and tighten
the nuts securely.
Section
Table of Contents
KC317A
KC320A
KC279
KC322