Environmentally Acceptable Measures, Disposal Of The Installation; Documentation; Fv 40 G; W E Reserve The Right To Change Execution And Construction - Meiko FV 40.2 Operating Instructions Manual

Operating instructions FV 40.2 / FV 40.2 G / FV 60.2
Maintenance procedures
Check that all connections (incl. hand spray) are watertight
Check settings of built-in water softener (if fitted)
Check operation of complete or partial water softener (if fitted)
Check water hardness
6. Waste water equipment
Check if watertight
Check pressure hose position and operation of drain pump
7. Electrical installation
Check of all fuses
Tighten all electrical connections
Check tank and boiler heating
Check thermostat and stop switch
8. Detergent dosing
Check dosage, adjust if necessary
9. Rinse aid dosing
Check dosage, adjust if necessary
10. Operation check of the complete machine
Check machine for correct interaction of all functions
11. Test run
Check results of test wash and rinse
Brief instruction for new personnel
Datei:1_FV40_60-2_9546822_Betriebsanleitung_EN_2004-03.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
18 Environmentally acceptable measures, Disposal of the
installation
Each discarded appliance is to be made immediately unserviceable - to avoid later
accidents.
•
Therefore, set the local main switch to „OFF" or switch off the local main fuse.
When you eventually dispose of the installation (dismantlement/scrapping), the parts and
their corresponding materials should preferably be re-used.
Here is a list of the materials that most frequently occur when dismantling:
• Chrome-nickel-steel
• Aluminium
• Copper
• Brass
• Electrical and electronic parts
• PP and other synthetic materials
19

Documentation

Installation drawing / technical sheet
Technical Data
Wiring diagram / Programming instructions
Update: 2008-03-10

W e reserve the right to change execution and construction!

S. „FV 40 G"
40/42
9544094