Operating instructions dishwashing machine model B-Tronic
Datei:BA_B-Tronic_MIKE_9636176_EN_2006-08.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Fault:
Vapours drains
Fault:
Stripes and smears on the
dishes
Fault:
Formation of a significant
amount of foam in the
wash tank
W e reserv e the right to change execution and construction!
Remedy
Extraction broke down
Curtains missing
Temperatures too high
Wash arms, drying nozzles, air guide plates bent or not
correctly inserted
Remedy
Rinse water mineral content too high (see operating
instructions)
If this is observed only at particular times, check water
softener for regeneration. This must not carried out
during the dishwashing operation.
Water pre-treatment defective or not carried out
Different water type depending on the waterworks
Unsuitable rinse aid products or wrong dosage quantity
Incorrectly fitted or missing curtains
Oversize containers previously washed causing
detergent to be transferred into following tanks
Too fast conveyor speed
Remedy
Detergent for dish-washing by hand enters the wash
tank because of pre-cleaning the dishes
Daily cleaning of the machine is carried out with
foaming cleansing agents which afterwards enter the
machine
Improve pre-wash, as too much food residue is
entering the tanks Alternatively, empty wash tanks
between uses.
Rinse water quantity too low
Detergent or rinse aid product not suitable
Temperatures too low < 40°C
Update: 2013-06-10, S. 4-13, 41
51/66
9636176