W E Reserv E The Right To Change Execution And Construction - Meiko EcoStar 430 F-MIKE Operating Instructions Manual

Operating instructions EcoStar 430 F-M
Datei:1_EcoStar430F-MIKE_9702129_Betriebsanleitung_EN_2012-07.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
16.3.2 Ventilating the rinse aid inlet
this display by pressing the "accept" key.
Now the dosage pump will be activated and the remaining running time will be indicated.
You can leave this level by pressing the "0" key. The ventilation will be interrupted off.
16.3.3 Ventilating the detergent inlet
this display by pressing the "accept" key.
Now the dosage pump will be activated and the remaining running time will be indicated.
You can leave this level by pressing the "0" key. The ventilation will be interrupted off.
Should the ventilation process be insufficient, repeat the process.
16.3.4 Configuration level
You can find the list of configuration parameters on this level (parameter numbers 2xx).
Here you can view these and modify them. You can also call up the status of the inputs
and outputs, or set the outputs for testing.
In der Konfigurationsebene wird zuerst
this corresponds to the viewing/modifying parameters. (see 16.3.5)
This corresponds to viewing the status of inputs. (see 16.3.6)
This corresponds to viewing and setting the status of outputs. (see 16.3.7)
Press the "I" key to move forwards or the "II" key to move backwards or the "accept" key
to make a selection. You are now at the current level.
You can leave this level by pressing the "0" key.
Update:

W e reserv e the right to change execution and construction!

9702129 24/38