3Com Switch 4800G 24-Port Configuration Manual page 696

Switch 4800g family 24-port, pwr 24-port, 48-port, pwr 48-port, 24-port sfp
Hide thumbs Also See for Switch 4800G 24-Port:
Table of Contents

Advertisement

696
C
48: MSDP C
HAPTER
ONFIGURATION
[SwitchD] display msdp brief
MSDP Peer Brief Information
Configured
Up
1
1
Peer's Address
1.1.1.1
To view the PIM routing information on the switches, use the display pim
routing-table command. When Source 1 (10.110.5.100/24) sends multicast data
to multicast group G (225.1.1.1), Receiver 1 joins multicast group G. By comparing
the PIM routing information displayed on Switch B with that displayed on Switch
D, you can see that Switch B acts now as the RP for Source 1 and Receiver 1.
# View the PIM routing information on Switch B.
[SwitchB] display pim routing-table
Total 1 (*, G) entry; 1 (S, G) entry
(*, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: WC
UpTime: 00:15:04
Upstream interface: Register
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Protocol: igmp, UpTime: 00:15:04, Expires: -
(10.110.5.100, 225.1.1.1)
RP: 10.1.1.1 (local)
Protocol: pim-sm, Flag: SPT 2MSDP ACT
UpTime: 00:46:28
Upstream interface: Vlan-interface103
Upstream neighbor: 10.110.2.2
RPF prime neighbor: 10.110.2.2
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface100
Protocol: pim-sm, UpTime:
# View the PIM routing information on Switch D.
[SwitchD] display pim routing-table
No information is output on Switch D.
Receiver 1 has left multicast group G. Source 1 has stopped sending multicast data
to multicast group G. When Source 2 (10.110.6.100/24) sends multicast data to
G, Receiver 2 joins G. By comparing the PIM routing information displayed on
Switch B with that displayed on Switch D, you can see that Switch D acts now as
the RP for Source 2 and Receiver 2.
# View the PIM routing information on Switch B.
[SwitchB] display pim routing-table
No information is output on Switch B.
# View the PIM routing information on Switch D.
Listen
Connect
0
0
State
Up/Down time
Up
00:10:18
Shutdown
0
AS
SA Count
Reset Count
?
0
0
- , Expires:
-
Down
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents