3Com Switch 4800G 24-Port Configuration Manual page 424

424 C 31: R
HAPTER OUTING
P C
OLICY ONFIGURATION
<SwitchA> system-view
[SwitchA] ospf
[SwitchA-ospf-1] area 0
[SwitchA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SwitchA-ospf-1-area-0.0.0.0] quit
[SwitchA-ospf-1] quit
# Configure Switch B: enable OSPF and redistribute routes from IS-IS.
[SwitchB] ospf
[SwitchB-ospf-1] area 0
[SwitchB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
[SwitchB-ospf-1-area-0.0.0.0] quit
[SwitchB-ospf-1] import-route isis 1
[SwitchB-ospf-1] quit
# Display OSPF routing table on Switch A to view redistributed routes.
[SwitchA] display ospf routing
OSPF Process 1 with Router ID 192.168.1.1
Routing for Network
Destination
192.168.1.0/24
Routing for ASEs
Destination
172.17.1.0/24
172.17.2.0/24
172.17.3.0/24
192.168.2.0/24
Total Nets: 5
Intra Area: 1 Inter Area: 0
4 Configure filtering lists
# Configure an ACL with the number of 2002, letting pass route 172.17.2.0/24.
[SwitchB] acl number 2002
[SwitchB-acl-basic-2002] rule permit source 172.17.2.0 0.0.0.255
[SwitchB-acl-basic-2002] quit
# Configure an IP prefix list named prefix-a, letting pass route 172.17.1.0/24.
[SwitchB] ip ip-prefix prefix-a index 10 permit 172.17.1.0 24
5 Configure a routing policy.
[SwitchB] route-policy isis2ospf permit node 10
[SwitchB-route-policy] if-match ip-prefix prefix-a
[SwitchB-route-policy] apply cost 100
[SwitchB-route-policy] quit
[SwitchB] route-policy isis2ospf permit node 20
[SwitchB-route-policy] if-match acl 2002
[SwitchB-route-policy] apply tag 20
[SwitchB-route-policy] quit
[SwitchB] route-policy isis2ospf permit node 30
[SwitchB-route-policy] quit
Routing Tables
Cost Type NextHop
1562 Stub 192.168.1.1
Cost Type Tag
1 Type2 1
1 Type2 1
1 Type2 1
1 Type2 1
ASE: 4 NSSA: 0
AdvRouter Area
192.168.1.1 0.0.0.0
NextHop AdvRouter
192.168.1.2 192.168.2.2
192.168.1.2 192.168.2.2
192.168.1.2 192.168.2.2
192.168.1.2 192.168.2.2