3Com Switch 4800G 24-Port Configuration Manual page 1010

1010 C 82: I
HAPTER NFORMATION
Table 79 Default output rules for different output destinations
Output destination Modules allowed
Console default (all modules)
Monitoring terminal default (all modules)
Log host default (all modules)
Trap buffer default (all modules)
Log buffer default (all modules)
SNMP NMS default (all modules)
C C
ENTER ONFIGURATION
To do...
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
the console
Configure the output rules of
system information
Configure the format of the
time stamp
LOG
Enabled/
disabled
Enabled
Enabled
Enabled
Disabled
Enabled
Disabled
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the
associated display function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the
console:
To do...
Enable the monitoring of
system information on the
console
Enable the display of
debugging information on
the console
Use the command...
info-center enable
info-center channel
channel-number name
channel-name
info-center console channel
{ channel-number |
channel-name }
info-center source
{ module-name | default }
channel { channel-number |
channel-name } [ debug
{ level severity | state state }
* | log { level severity | state
state } * | trap { level severity
| state state } * ] *
info-center timestamp
{ debugging | log | trap }
{ boot | date | none }
TRAP
Enabled/
Severity disabled
warnings Enabled
warnings Enabled
informational Enabled
informational Enabled
warnings Disabled
debugging Enabled
Use the command...
terminal monitor
terminal debugging
Remarks
Optional
Enabled by default
Optional
Refer to Table 77 for default
channel names.
Optional
System information is output
to the console by default,
with channel 0 as the default
channel.
Optional
Refer to Table 79 for the
default output rules of system
information.
Optional
The time stamp format for
log, trap and debugging
information is date by
default.
DEBUG
Enabled/
Severity disabled
debugging Enabled
debugging Enabled
debugging Disabled
warnings Disabled
debugging Disabled
warnings Disabled
Remarks
Optional
Enabled on the console and
disabled on the monitoring
terminal by default.
Required
Disabled by default
Severity
debugging
debugging
debugging
debugging
debugging
debugging