3Com Switch 4800G 24-Port Configuration Manual page 1054

1054 C 86: NQA C
HAPTER
Configuring the HTTP
Test
ONFIGURATION
To do...
Enter NQA test group view
Configure the test type as FTP
and enter test type view
Configure the destination
address for a test operation
Configure the source IP
address of a probe request
Configure the operation type operation { get | put }
Configure a login username
Configure a login password
Specify a file to be transferred
between the FTP server and
the FTP client
Configure common optional
parameters
The HTTP test is used to test the connection with a specified HTTP server and the
time required to obtain data from the HTTP server.
Configuration prerequisites
Before performing an HTTP test, you need to configure the HTTP server.
Configuring the HTTP test
Follow these steps to configure the HTTP test:
To do...
Enter system view
Enter NQA test group view
Use the command...
nqa entry admin-name
operation-tag
type ftp
destination ip ip-address
source ip ip-address
username name
password password
filename file-name
Refer to "Configuring
Optional Parameters
Common to an NQA Test
Group" on page 1062
Use the command...
system-view
nqa entry admin-name
operation-tag
Remarks
-
Required
Required
By default, no destination IP
address is configured for a test
operation.
The destination IP address for a
test operation is the IP address
of the FTP server.
Required
By default, no source IP address
is specified.
The source IP address must be
that of an interface on the
device and the interface must
be up. Otherwise, the test will
fail.
Optional
By default, the operation type
for the FTP is get, that is,
obtaining files from the FTP
server.
Required
By default, no login username is
configured.
Required
By default, no login password is
configured.
Required
By default, no file is specified.
Optional
Remarks
-
-