3Com Switch 4800G 24-Port Configuration Manual page 1150

1150 C 90: RRPP C
HAPTER
c
Edge Node
Configuration Example
ONFIGURATION
To do...
Create an RRPP domain and
enter its view
Specify a control VLAN for the
RRPP domain
Specify the current device as
the transit node of the
primary ring, and specify the
primary port and the
secondary port
Specify the current device as
the edge node of a sub ring,
and specify the common port
and the edge port
Enable the primary ring
Enable the sub ring
Return to system view
Enable RRPP
CAUTION:
The control VLAN configured for an RRPP domain must be a new one.
■
Control VLAN configuration is required for configuring an RRPP ring.
■
A Ring ID cannot be applied to more than one RRPP ring in an RRPP domain.
■
You must first configure the primary ring and then the sub ring when
■
configuring an edge node. Moreover, you must remove all sub ring
configurations before deleting the primary ring configuration of an edge node.
However, the RRPP ring enabled cannot be deleted.
To use the undo rrpp domain command to remove an RRPP domain, you
■
must ensure the RRPP domain has no RRPP ring.
Networking requirements
Specify the device in RRPP domain 1;
■
Set VLAN 4092 as the control VLAN;
■
Specify the device as the transit node of primary ring 1 in RRPP domain 1,
■
GigabitEthernet 1/0/1 as the primary port and GigabitEthernet 1/0/2 as the
secondary port;
Specify the device as the edge node of sub ring 2 in RRPP domain 1,
■
GigabitEthernet 1/0/2 as a common port and GigabitEthernet 1/0/4 as an edge
port.
Use the command...
rrpp domain domain-id
control-vlan vlan-id
ring ring-id node-mode
transit [ primary-port
interface-type
interface-number ]
[ secondary-port
interface-type
interface-number ] level
level-value
ring ring-id node-mode
edge [ common-port
interface-type
interface-number ]
[ edge-port interface-type
interface-number ]
ring ring-id enable
ring ring-id enable
quit
rrpp enable
Remarks
Required
Required
Required
Required
Required
By default, the RRPP ring is
disabled.
Required
By default, the RRPP ring is
disabled.
-
Required
By default, RRPP is disabled.