Snmp Configuration - 3Com Switch 4800G 24-Port Configuration Manual

SNMP Configuration

string of numbers {1.2.1.1}. This string of numbers is the OID of the managed
object B.
Figure 273 MIB tree
1
1
1
1
B
5 6
A
As configurations for SNMPv3 differ substantially from those of SNMPv1 and
SNMPv2c, their SNMP functionalities will be introduced separately below.
Follow these steps to configure SNMPv3:
To do...
Enter system view
Enable SNMP Agent
Configure SNMP Agent
system information
Configure an SNMP agent
group
Convert the user-defined
plain text password to a
cipher text password
2
2
2
Use the command...
system-view
snmp-agent
snmp-agent sys-info
{ contact sys-contact |
location sys-location |
version { all | { v1 | v2c |
v3 }* } }
snmp-agent group v3
group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
[ acl acl-number ]
snmp-agent
calculate-password
plain-password mode { md5 |
sha } { local-switch fabricid |
specified-switch fabricid
string }
SNMP Configuration 933
Remarks
-
Optional
Disabled by default
You can enable SNMP Agent
through this command or any
commands that begin with
snmp-agent.
Optional
The defaults are as follows:
3Com Corporation for
contact,
Marlborough, MA for
location, and SNMP v3 for the
version.
Required
Optional