Configuring Hwtacacs - 3Com Switch 4800G 24-Port Configuration Manual

Switch 4800g family 24-port, pwr 24-port, 48-port, pwr 48-port, 24-port sfp
Hide thumbs Also See for Switch 4800G 24-Port:
Table of Contents

Advertisement

Configuring RADIUS
Accounting-on
Enabling the Listening
Port of the RADIUS
Client
Configuring
HWTACACS
Creating a HWTACAS
scheme
To configure the maximum number of retransmission attempts of RADIUS
packets, refer to the command retry in the command manual.
With the accounting-on function enabled, a device sends, whenever it reboots,
accounting-on packets to the RADIUS server, requesting the server to force its
users offline.
Once configured, the accounting-on function is executed as soon as the device
restarts and completes its configuration. In case that the majority of the RADIUS
servers (a device can be configured with 16 schemes at most) fail to respond to the
accounting-on packets, the number of accounting-on packet retransmission
attempts is too big, or the accounting-on packet retransmission interval is too
long, the device will not handle AAA services until all these packets are
retransmitted and all RADIUS servers have responded to accounting-on packets.
Follow these steps to configure accounting-on function of a RADIUS server:
To do...
Enter system view
Create RADIUS scheme and
enter its view
Enable accounting-on
Set the number of
accounting-on packet
retransmission attempts
Set the retransmission interval
of accounting-on packets
n
If the system has no authentication scheme enabled with the accounting-on
function when you execute the accounting-on enable command, you need to
save the configuration and restart the device so that the command takes effect.
Otherwise, the command takes effect immediately.
Follow these steps to enable the listening port of the RADIUS client:
To do...
Enter system view
Enable the listening port of
the RADIUS client
The HWTACACS protocol is configured on a per scheme basis. Before performing
other HWTACACS configurations, follow these steps to create a HWTACACS
scheme and enter HWTACACS scheme view:
Use the command...
system-view
radius scheme
radius-scheme-name
accounting-on enable
accounting-on enable send
send-times
accounting-on enable
interval seconds
Use the command...
system-view
radius client enable

Configuring HWTACACS

Remarks
-
Required
Not defined by default
Required
Disabled by default
Optional
5 times by default
Optional
3 seconds by default
Remarks
-
Optional
Enabled by default
771

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents