Ipv6 Configuration Example - 3Com Switch 4800G 24-Port Configuration Manual

Switch 4800g family 24-port, pwr 24-port, 48-port, pwr 48-port, 24-port sfp
Hide thumbs Also See for Switch 4800G 24-Port:
Table of Contents

Advertisement

IPv6 Configuration
Example
To do...
Display the total number of
neighbor entries satisfying the
specified conditions
Display the PMTU information
of an IPv6 address
Display information related to a
specified socket
Display the statistics of IPv6
packets and ICMPv6 packets
Display the IPv6 TCP connection
statistics
Display the IPv6 TCP connection
status
Display the IPv6 UDP
connection statistics
Clear IPv6 dynamic domain
name cache information
Clear IPv6 neighbor information reset ipv6 neighbors { all | dynamic |
Clear the corresponding PMTU
Clear the statistics of IPv6 and
ICMPv6 packets
Clear all IPv6 TCP connection
statistics
Clear the statistics of all IPv6
UDP packets
n
The display dns domain command is the same as the one of IPv4 DNS. For
details about the commands, refer to "DNS Configuration" on page 971.
Network requirements
Two switches are directly connected through two Ethernet ports. The Ethernet
ports belong to VLAN 2. Configure different types of IPv6 addresses for
VLAN-interface 2 respectively on Switch A and Switch B to verify the connectivity
between two switches. The IPv6 prefix in the EUI-64 format is 2001::/64. Specify
the aggregatable global unicast address of Switch A as 3001::1/64, and the
aggregatable global unicast address of Switch B as 3001::2/64.
Network diagram
Figure 155 Network diagram for IPv6 address configuration
Switch A
Vlan-int2
Configuration procedure
Configuration on Switch A

IPv6 Configuration Example

Use the command...
display ipv6 neighbors { all | dynamic |
interface interface-type interface-number |
static | vlan vlan-id } count
display ipv6 pathmtu { ipv6-address | all |
dynamic | static }
display ipv6 socket [ socktype socket-type ]
[ task-id socket-id ]
display ipv6 statistics
display tcp ipv6 statistics
display tcp ipv6 status
display udp ipv6 statistics
reset dns ipv6 dynamic-host
interface interface-type interface-number |
static }
reset ipv6 pathmtu { all | static | dynamic}
reset ipv6 statistics
reset tcp ipv6 statistics
reset udp ipv6 statistics
Switch B
Vlan-int2
517
Remarks
Available in
any view
Available in
user view

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents