Displaying And Maintaining Congestion Management - 3Com Switch 4800G 24-Port Configuration Manual

882 C 68: C
HAPTER ONGESTION
Configuration Examples
Displaying and
Maintaining
Congestion
Management
M
ANAGEMENT
To do...
Configure WRR queue
scheduling
Network requirements
Configure to adopt SP+WRR queue scheduling algorithm on
■
GigabitEthernet1/0/1.
Configure queue 0, queue 1, queue 2 and queue 3 on GigabitEthernet1/0/1 to
■
be in SP queue scheduling group.
Configure queue 4, queue 5, queue 6 and queue 7 on GigabitEthernet1/0/1 to
■
be in WRR queue scheduling group, with the weight being 2, 4, 6 and 8
respectively.
Configuration procedure
# Enter system view.
<Sysname> system-view
# Enable the SP+WRR queue scheduling algorithm on GigabitEthernet1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 3 group sp
[Sysname-GigabitEthernet1/0/1] qos wrr 4 group 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wrr 5 group 1 weight 4
[Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 6
[Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 8
To do...
Display WRR queue
configuration information
Display SP queue
configuration information
Use the command...
qos wrr queue-id group
group-id weight
queue-weight
Use the command...
display qos wrr interface
[ interface-type
interface-number ]
display qos sp interface
[ interface-type
interface-number ]
Remarks
Required
Remarks
Available in any view