3Com Switch 4800G 24-Port Configuration Manual page 1177

<Switch> display mac-authentication interface gigabitethernet 1/0/1
MAC address authentication is enabled.
User name format is fixed account
Fixed username:aaa
Fixed password:123456
Offline detect period is 300s
Quiet period is 60s
Server response timeout value is 100s
The max allowed user number is 1024 per slot
Current user number amounts to 0
Current domain: not configured, use default domain
Silent MAC User info:
MAC Addr
GigabitEthernet1/0/1 is link-up
MAC address authentication is enabled
Authenticate success: 3, failed: 1
Current online user number is 3
MAC Addr
1234-0300-0011
1234-0300-0012
1234-0300-0013
Use the following command to view 802.1x authentication information:
<Switch> display dot1x interface gigabitethernet 1/0/1
Equipment 802.1X protocol is enabled
CHAP authentication is enabled
Configuration: Transmit Period
Quiet Period
Supp Timeout
The maximal retransmitting times
The maximum 802.1X user resource number is 1024 per slot
Total current used 802.1X resource number is 1
GigabitEthernet1/0/1
802.1X protocol is enabled
Handshake is enabled
The port is an authenticator
Authentication Mode is Auto
Port Control Type is Mac-based
802.1X Multicast-trigger is enabled
Guest VLAN: 0
Max number of on-line users is 256
EAPOL Packet: Tx 16331, Rx 102
Sent EAP Request/Identity Packets : 16316
EAP Request/Challenge Packets: 6
EAP Success Packets: 4, Fail Packets: 5
Received EAPOL Start Packets : 6
EAPOL LogOff Packets: 2
EAP Response/Identity Packets : 80
EAP Response/Challenge Packets: 6
Error Packets: 0
1. Authenticated user : MAC address: 0002-0000-0011
Controlled User(s) amount to 1
Port Security Configuration Examples
From Port
Authenticate State
MAC_AUTHENTICATOR_SUCCESS
MAC_AUTHENTICATOR_SUCCESS
MAC_AUTHENTICATOR_SUCCESS
30 s, Handshake Period
60 s, Quiet Period Timer is disabled
30 s, Server Timeout
is link-up
1177
Port Index
Auth Index
13
14
15
15 s
100 s
2