3Com Switch 4800G 24-Port Configuration Manual page 1044

1044 C 85: D
HAPTER EVICE
c
M
ANAGEMENT
Device through command lines). Ensure that a route exists between User and
Device.
Network diagram
Figure 306 Network diagram for remote upgrade
Internet
Telnet
User
Configuration procedure
Configuration on FTP Server (Note that configurations may vary with different
■
types of servers)
# Enable FTP Server.
<FTP-Server> system-view
[FTP-Server] ftp server enable
# Set the FTP username to aaa and password to hello.
[FTP-Server] local-user aaa
[FTP-Server-luser-aaa] password cipher hello
# Configure the user to have access to the aaa directory.
[FTP-Server-luser-aaa] service-type ftp ftp-directory flash:/aaa
Configuration on Device
■
CAUTION: If the size of the Flash on the device is not large enough, delete the
original application programs from the Flash before downloading.
# Enter the following command in user view to log in to FTP Server.
<Device> ftp 2.2.2.2
Trying ...
Press CTRL+K to abort
Connected.
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new use
r
User(none): aaa
331 Give me your password, please
Password:
FTP Server
2.2.2.2/24
FTP Client
Device
1.1.1.1/24