3Com Switch 4800G 24-Port Configuration Manual page 1117

Establishing a
Connection Between the
SSH Client and the
Server
To do...
Enter system view
Disable first-time
authentication support
Configure the server public
key
Specify the host public key
name of the server
Follow these steps to establish the connection between the SSH client and the
server:
Configuring the Device as an SSH Client
Use the command...
system-view
undo ssh client first-time
Refer to "Configuring a Client
Public Key" on page 1112
"Configuring a Client Public Key"
on page 1112
ssh client authentication
server server assign publickey
keyname
1117
Remarks
-
Optional
By default, first-time
authentication is supported
on a client.
Required
The method of configuring
server public key on the client
is similar to that of
configuring client public key
on the server.
Required