3Com Switch 4800G 24-Port Configuration Manual page 522

522 C 39: D S
HAPTER UAL
C
TACK ONFIGURATION
To do...
Enable the IPv6 packet forwarding function
Enter interface view
Configure an IPv4 address for the interface
Configure Configure
an IPv6 IPv6 global
address on unicast
the interface address or
local address
Configure
IPv6
link-local
address
Use the command...
ipv6
interface interface-type
interface-number
ip address ip-address
{ mask | mask-length }
[ sub ]
Manually specify ipv6 address
an IPv6 address { ipv6-address
prefix-length |
ipv6-address/prefix-length
}
Configure an IPv6 ipv6 address
address in the ipv6-address/prefix-length
EUI-64 format eui-64
Automatically ipv6 address auto
create an IPv6 link-local
link-local address
Manually specify ipv6 address
an IPv6 link-local ipv6-address link-local
address
Remarks
Required
Disabled by
default.
-
Required
By default, no IP
address is
configured.
Use either
command.
By default, no
local address or
global unicast
address is
configured on an
interface
Optional
By default, after
you configured
an IPv6 local
address or global
unicast address, a
link local address
is automatically
created.