3Com Switch 4800G 24-Port Configuration Manual page 976

976 C 78: DNS C
HAPTER ONFIGURATION
n
Network diagram
Figure 292 Network diagram for dynamic domain name resolution
2.1.1.2 /16
2.1.1.1/16
DNS server
DNS client
Configuration procedure
Before performing the following configuration, make sure that there is a route
■
between the device and the host, and configurations are done on both the
device and the host. For the IP addresses of the interfaces, see Figure 292.
This configuration may vary with different DNS servers. The following
■
configuration is performed on a Windows 2000 server.
Configure the DNS server
■
# Enter DNS server configuration page.
Select Start > Programs > Administrative Tools > DNS.
# Create zone com.
In Figure 293, right click Forward Lookup Zones, select New zone, and then
follow the instructions to create a new zone.
Figure 293 Create a zone
# Create a mapping between the host name and IP address.
IP network
1.1.1.1 /16
3.1.1 .1/16
host.com
Switch
Host